

OUR POWDERCOATING PROCESS
We utilize the most state of the art processes and products to prep and coat your parts
Chemical Stripping
We utilize an environmentally friendly stripping compound to remove the original coating and prepare it for a new coating.
Masking
High-temp masking tape and silicone plugs are applied to any area of the part that powder coating is not desired.
Outgassing
Outgassing is heating up the part to a temperature above the curing temperature to dry any moisture and bring any contamination to the surface.
Coating
Powder is applied electrostatically to a grounded part resulting in an evenly and completely coated part.
Media Blasting
Media blasting the parts removes any of the remaining original coating and gives the parts a proper profile for mechanical adhesion of the new powder.
Baking
Parts are baked at a temperature and time specific to the powder coat applied. Once baked, the powder is completely cured and ready for reassembly.

Contact us today for more information on how we can help you achieve your goals!
CALL US
EMAIL US
OPENING HOURS
Mon-Fri: 9:00am-5:30pm